Popularization of knowledge on metal warehouse mold shelves

Hardware warehouse mold shelves are also a type of shelf for storing various mold items, abbreviated as mold racks. Mainly storing various mold items, they are divided into light mold shelves and heavy mold shelves according to their load-bearing capacity requirements. The top of the shelf can be equipped with a mobile hoist truck to facilitate the lifting of the mold.

There are four common surface treatment schemes for mold shelves: spray painting, plastic spraying, hot galvanizing, and cold galvanizing. Hot dip galvanizing is the most effective rust prevention method, but its cost is also high and not accepted by the majority of consumers; The most widely used ones are still spray painting and plastic spraying.

Mold shelves, also known as mold racks or drawer type shelves, mainly store various mold items and are divided into light mold shelves and heavy mold shelves according to layer load capacity requirements. The top of the shelf can be equipped with a mobile hoist truck to facilitate the lifting of the mold.

Product features:

1. Combination assembly, mainly composed of column pieces, guide grooves, drawer layers, pull rods, positioning pins, etc,

Adopting bolt connection, the structure is stable, safe and reliable, and generally used in rows.

2. The drawer tray mainly consists of slide rails and drawer trays. The drawer tray is composed of a frame welded with rectangular tubes and bent parts, and steel plates.

Each slide rail is fixed by two bearings in front, back, up, and down, allowing for free rolling in the guide groove with low resistance and easy drawer pulling out.

3. For safety reasons, the drawer tray of the mold shelf has been designed with positioning pins and limit pins to ensure safety when the drawer tray is pulled out.

4. The lightweight mold shelf layer is loaded between 200 to 800kg/layer. Heavy-duty drawer type shelves are loaded in layers ranging from 800 to 1500kg/layer.

5. Mold shelves cover a small area, have large layers, detailed classification, and are easy to operate.

6. The mold shelf can also be used as a drawer tray on the crossbeam of the storage rack, which is more cost-effective and structurally stable.